Underfloor heating is not a new concept in this country. In the past electric heating elements were buried within floor screeds.
These were heated over night using 'cheap rate' electricity. However, this method was expensive to run and uncontrollable
and the building would over heat during the day but in the evening, when heat is generally required, no further heat was available.
Utilising today's modern multilayer pipes, control systems and high efficiency boilers, the underfloor heating systems of today are
extremely comfortable and controllable. Radiators are no longer needed so giving more room space. The heat is more evenly distributed
and dust is not circulated.
The majority of the population now spends at least 22 of every 24 hours in some kind of artificial climate. Underfloor heating is far from a new
concept, it was first used by the Romans whose dwellings were constructed with voids through which air, warmed by an open fire, would pass, thus
heating the structure.
Underfloor heating from the whole floor area of the house gently warms the air above, eliminating cold spots. The warm air convects
from the floor surface losing approximately 2 degrees centigrade at 2.0 meters above the floor, which makes the system ideal for all
ceiling heights.
Independent tests reveal that the most acceptable indoor climate is one in which the floor temperature ranges between 19-29°C and the air
temperature at head level ranges between 20 and 24°C. With radiator or convector heating systems a vertical temperature gradient is produced;
colder at foot level than at the head.